Tag: M.W:300-400

(2,2¡ä-Bipyridine)dichloropalladium(II), A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

Solid [Pd(bpy)Cl2] (0.085 g, 0.25 mmol) was added to Hdahmp(0.04 g, 0.25 mmol) in ethanol (10 mL). Et3N (0.02 cm3, 0.20 mmol)was then added and the reaction mixture was refluxed for 48 h. Abrown precipitate was obtained which was filtered off, washedwith methanol and air-dried. Yield: 81%. Anal. Calc. for C14H13ClN6-OPdS: C, 36.9; Cl, 7.8; H, 2.9; N, 18.5; S, 7.0; Pd, 23.4. Found: C,37.1; Cl, 7.8; H, 2.8; N, 18.6; S, 7.2; Pd, 23.3%. Conductivity data(103 M in DMF): KM = 88.0 ohm1 cm2 mol1.

As the rapid development of chemical substances, we look forward to future research findings about 14871-92-2

Reference£º
Article; El-Morsy, Fatema A.; Jean-Claude, Bertrand J.; Butler, Ian S.; El-Sayed, Shadia A.; Mostafa, Sahar I.; Inorganica Chimica Acta; vol. 423; PB; (2014); p. 144 – 155;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

(2,2¡ä-Bipyridine)dichloropalladium(II), A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

The new bimetallic dinuclear complex, [{PdCl(bipy)}{l-(NH2(CH2)6H2N)}{PtCl(bipy)}]Cl(ClO4), was synthesized by modificationof the procedure reported in the literature [25]. The complex[PtCl2(bipy)] (100.0 mg, 0.236 mmol) was dissolved in DMF(10 cm3) and a solution of AgClO4 (49.1 mg, 0.236 mmol) in DMF(5 cm3) was added. The mixture was stirred overnight in the dark,at room temperature. The precipitate AgCl was removed by filtrationand the resulting pale yellow solution of [PtCl(bipy)(DMF)]ClO4 was kept in a refrigerator to cool down. A suspension of[PdCl2(bipy)] complex (73.5 mg, 0.220 mmol) in 10 cm3 of DMFwas heated with stirring at 303-313 K for about 30 min. After that,the solution of 1,6-diaminohexane (25.5 mg, 0.220 mmol) in 5 cm3DMF was added dropwise. The mixture was stirred at room temperaturefor 5 h in the dark. The filtrate [PtCl(bipy)(DMF)]ClO4was added to the resulting mixture. The clear yellow solutionwas stirred for 3 h at 323 K and then for 24 h at room temperature.The solution was then evaporated and the residue washed withether. A light yellow powder was obtained and left to dry in theair. Yield (63.8 mg, 62%). Anal. Calc. for PtPdCl4O4N6C26H32(FW = 935.88): C, 33.37; H, 3.45; N, 8.98. Found: C, 33.07; H,3.80; N, 8.73%. 1H NMR characterization (D2O, 200 MHz). 1H NMR(d, ppm): 1.35-1.50 (m, CH2 C3, C4), 1.60-1.80 (m, CH2 C2, C5),2.95-3.06 (m, CH2 C1, C6), 7.30-7.42 (d, CH H5/H50(1)), 7.45-7.60 (d, CH H5/H50(2)), 7.65-7.84 (m, CH H4/H40(1)), 8.05-8.15(m CH H4/H40(2)), 8.17-8.28 m, CH H3/H30(1)), 8.32-8.40 (m, CHH3/H30(2)), 8.42-8.48 (d CH H6/H60(1)), 8.50-8.58 (d CH H6/H60(2)). IR (KBr, 4000-300 cm1): 3438 (N-H stretch); 2853, 2927(CH2 stretch); 1610 (CN stretch); 1089 (perchlorate counterion); 765, 812 (N-H wagging) (Fig. S1).

As the rapid development of chemical substances, we look forward to future research findings about 14871-92-2

Reference£º
Article; Jovanovi?, Sne?ana; Petrovi?, Biljana; Petkovi?, Marijana; Bugar?i?, ?ivadin D.; Polyhedron; vol. 101; (2015); p. 206 – 214;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) it is a common compound, a new synthetic route is introduced below.

A suspension of 1 mmol (0.333 g) of [Pd(bpy)Cl2] in 150 mL ofacetone was treated with 1 mmol (0.228 g) of benzyl dithiocarbamatesodium salt and the mixture was refluxed under continuousmagnetic stirring for 2 h. Stirring continued for another 12 h at 318 K and then filtered.The resulting yellow colored filtrate containing the desired productwas concentrated to 15 mL at 318 K. The orange precipitate formedwas filtered off and washed with diethyl ether. Recrystallizationwas done by dissolving the precipitate in minimum amount ofethanol. Yield: 0.336 g (70%) and decomposes at 207-209 C. Anal.Calcd. for C18H16N3S2ClPd (480.34 g mol-1) Found, (Calcd.) (%): C45.01, (45.05); H, 3.36 (3.34); N, 8.75 (8.76). Molar conductance forthe complex (10-3 M, H2O) is 9.0 mS m2 mol-1. FT-IR (KBr, cm-1):3405 upsilon(N-H); 3020 upsilon(Caro-H); 1550 upsilon(C-N); 1313 upsilons (CNS); 1036 upsilonas(CNS); 503 upsilon (Pd-N); 450 upsilon (Pd-S). 1H NMR (DMSO-d6-D2O, delta ppm):4.71 (d, 2H, H-c), 7.40 (m,1H, H-a), 7.32 (m, 4H, H-b), 8.54 (m, 2H, H-6,60), 8.27 (m, 2H, H-3,30), 8.18 (m, 2H, H-4,40), 7.68 (M, 2H, H-5,50)(Fig. 1). 13C NMR (DMSO-d6, delta ppm): 48.00 (C-e), 139.67 (C-5,5′),139.84 (C-4,4′), 140.00 (C-a), 140.17 (C-b), 140.34 (C-c), 140.50 (C-3,30), 140.60 (C-d), 140.67 (C-1,10), 140.76 (C-f) (Fig. 1). The NMRnumbering schemes are given in Fig. 1. UV-Vis data (H2O, lambdamax/nm,(log epsilon)): 312 (3.40), 249 (3.75), 187 (3.94).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Saeidifar, Maryam; Mirzaei, Hamidreza; Ahmadi Nasab, Navid; Mansouri-Torshizi, Hassan; Journal of Molecular Structure; vol. 1148; (2017); p. 339 – 346;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) it is a common compound, a new synthetic route is introduced below.14871-92-2

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, (2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

The chemical industry reduces the impact on the environment during synthesis,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, (2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

To a vigorously stirred solution of BzpheH2 (32.32 mg,0.12 mmol) in 8 mL CH3OH/H2O (V:V D 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heatedto 50C and adjusted to pH D 8-9 by NaOH solution, andthen stirred for 2 h. The solution was concentrated to about80% of the original volume. The complex I-a was separatedfrom the solution after a few days. Yellow crystalline, yield: 68%. IR (KBr, cm1): n(Amide&)1551, n(OCO)a 1632, n(OCO)a1383, n(Pd-N) 566, n(Pd-O) 465. 1H NMR (600 MHz, d6-DMSO) d (ppm): 3.08 (dd, J D 13.1, 4.5 Hz, 1H, CH2-H),3.29 (dd, J D 13.1, 4.5 Hz, 1H, CH2-H), 5.08-5.05 (m, 1H,CH), 6.65 (t, J D 7.5 Hz, 1H, Ar-H), 6.73 (t, J D 7.5 Hz, 2H,Ar-H), 7.09 (d, J D 3.0 Hz, 3H, Ar-H), 7.13 (d, J D 5.4 Hz,1H, Ar-H), 7.23 (d, J D 7.2 Hz, 2H, Ar-H), 7.28 (d, J D5.4 Hz, 1H, Ar-H), 7.78-7.75 (m, 1H, Ar-H), 8.02 (t, J D7.8 Hz, 1H, Ar-H), 8.26 (d, J D 7.8 Hz, 1H, Ar-H), 8.30 (t, JD 6.9 Hz, 4H, Ar-H), 8.42 (d, J D 7.8 Hz, 1H, Ar-H). ESIMS:568.03 [MCK]C. Anal. Calcd. for [Pd(bipy)(Bzphe-N,O)] (C26H21N3O3Pd, 529.06): C, 58.93; H, 3.99; N, 7.93.Found: C, 58.84; H, 4.04; N, 7.84.

The chemical industry reduces the impact on the environment during synthesis,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Potassium chloropalladite, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”10025-98-6

General procedure: The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h.

As the rapid development of chemical substances, we look forward to future research findings about 10025-98-6

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) it is a common compound, a new synthetic route is introduced below.

Mefenamic acid (0.40 mmol) was dissolved in methanol (15 mL) followed by the addition of KOH (0.40 mmol). After 60 min of stirring, the resulting solution was slowly added to an aqueous solution of [PdCl2(bipy)] (0.20 mmol). After 40 min of constant stirring, the yellow solid obtained was collected by filtration, washed with ethanol and dried in a desiccator with P4O10. The yield was 63%. Anal. Calc. for [Pd(C15H14NO2)2(bipy)] (%): C 64.6; H 4.88;N 7.54. Found: C 63.3; H 4.74; N 7.62. The complex is soluble inchloroform and insoluble in water and DMSO. As already observed for the Pd-tra complex, no single crystals were obtained to perform an X ray structural characterization. The [PdCl2(bipy)] complexused as a precursor in the synthesis of Pd-mef was synthesized as described in the literature [21].

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Carvalho, Marcos A.; Arruda, Eduardo G.R.; Profirio, Daniel M.; Gomes, Alexandre F.; Gozzo, Fabio C.; Formiga, Andre L.B.; Corbi, Pedro P.; Journal of Molecular Structure; vol. 1100; (2015); p. 6 – 13;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) it is a common compound, a new synthetic route is introduced below.

Direct synthesis from 1a, CF3SO3Ag, and [Pd(bipy)Cl2]. A solution of Pd(bipy)Cl2 (0.10 g, 0.30 mmol) in 5 mL of CH3CN and a solution of CF3SO3Ag (0.15 g, 0.58 mmol) in 5 mL of CH3CN were mixed and heated under reflux for a day. Precipitates were filtered off and the solvent was evaporated. The resultant pale yellow powder was dissolved in a mixture of CH3CN and CHCl3, and then 1a (0.35 g, 0.58 mmol) was added. The mixture was heated under reflux for a day, and then, filtered and the solvents were removed under reduced pressure. Resultant material was recrystallized from CH3CN- CHCl3 mixture twice. White fibers (0.27 g, 46.0%) were obtained. Mp. 249-252 C (dec.). 1H NMR ( CDCl3/CD3CN = 4/1, v/v, 300 MHz): delta 10.41 (brs, 8H, OH), 9.35 (brs, 4H, Py-H), 8.33 (d, J = 7.5 Hz, 2H, bipy-H), 8.26 (t, J = 7.0 Hz, 2H, bipy-H), 7.92 (brs, 4H, Py-H), 7.51 (t, 2H, bipy-H), 7.26 (d, J = 4.4 Hz, 2H, bipy- H), 6.99 (s, 4H, ArH), 6.95 (s, 4H, ArH), 6.89 (s, 4H, ArH), 6.67 (s, 4H, ArH), 4.11 (d, J = 13.8 Hz, 2H. CH2), 4.02 (d, J = 13.6 Hz, 4H. CH2), 3.80 (brs, 4H, CH2), 3.66 (brd, J = 10.8 Hz, 4H, CH2), 3.47 (brd, J = 13.8 Hz, 4H. CH2), 3.43 (brd, J = 12.9 Hz, 2H. CH2), 3.32 (d, J = 12.9 Hz, 4H, CH2), 2.19, 2.17 (s, 24H, CH3). 13C NMR ( CDCl3/CD3CN = 4/1, v/v, 75.6 MHz): delta 157.0, 153.2, 151.7, 150.7, 149.7, 147.2, 142.3, 131.2, 131.1, 130.0, 129.6, 129.5, 128.2, 128.0, 127.8, 127.8, 127.7, 124.2, 123.0, 121.0, 118.8, 57.7, 56.7, 32.0, 31.5, 20.5, 20.3. FABMS: m/z: 1611.5 ( M+); HRMS (FAB): calcd for C89H88F3N6O11S106Pd ( M2+ + TflO-), 1611.5219. Found: 1611.5231.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Takemura, Hiroyuki; Mogami, Yukako; Okayama, Kanae; Nagashima, Noriko; Orioka, Kana; Hayano, Yuri; Kobayashi, Asako; Iwanaga, Tetsuo; Sako, Katsuya; Journal of Inclusion Phenomena and Macrocyclic Chemistry; vol. 95; 3-4; (2019); p. 235 – 246;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, (2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

General procedure: Solid [Pd(L)Cl2] (L = bpy, phen) (0.2 mmol) was added to methanolic solution H2mesc (0.039 g, 0.2 mmol) containing KOH (0.0224 g, 0.4 mmol;; 15 mL). The mixture was stirred for 24 h. The yellow precipitate was filtered off, washed with methanol and air-dried. For [Pd(bpy)(mesc)]: Anal. Calc. For C20H15N2O4.5Pd: C, 52.0; H, 3.3; N, 6.1; Pd, 23.1%, Found: C, 52.1, H, 3.2; N, 6.0; Pd, 23.0%. Conductivity data (10-3 M in DMSO): LambdaM = 2.0 Ohm-1 cm2 mol-1. IR (cm-1); nu(C=O) 1664; nu(C-C) 1486; nu(C-O) 1254; nu(Pd-O) 521; nu(Pd-N) 427. 1H NMR (d6-DMSO/TMS, ppm), delta: CH3, 3.36; H(3), 6.66; H(8), 5.90; H(5), 6.50. ESI-MS: m/z: 905 (Calcd 904.8) [Pd(bpy)(mesc)]2+, 453 (Calcd 452.4) [Pd(bpy)(mesc)]+.

The chemical industry reduces the impact on the environment during synthesis,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Butler, Ian S.; Gilson, Denis F.R.; Jean-Claude, Bertrand J.; Mostafa, Sahar I.; Inorganica Chimica Acta; vol. 423; PB; (2014); p. 132 – 143;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method