M.W:300-400 | Page 65 of 79 | Catalyst palladium

Discovery of 14871-92-2

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.14871-92-2

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Discovery of (2,2¡ä-Bipyridine)dichloropalladium(II)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

14871-92-2, General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

Extended knowledge of (2,2¡ä-Bipyridine)dichloropalladium(II)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

14871-92-2,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.14871-92-2,A new synthetic method of this compound is introduced below.

Direct synthesis from 1a, CF3SO3Ag, and [Pd(bipy)Cl2]. A solution of Pd(bipy)Cl2 (0.10 g, 0.30 mmol) in 5 mL of CH3CN and a solution of CF3SO3Ag (0.15 g, 0.58 mmol) in 5 mL of CH3CN were mixed and heated under reflux for a day. Precipitates were filtered off and the solvent was evaporated. The resultant pale yellow powder was dissolved in a mixture of CH3CN and CHCl3, and then 1a (0.35 g, 0.58 mmol) was added. The mixture was heated under reflux for a day, and then, filtered and the solvents were removed under reduced pressure. Resultant material was recrystallized from CH3CN- CHCl3 mixture twice. White fibers (0.27 g, 46.0%) were obtained. Mp. 249-252 C (dec.). 1H NMR ( CDCl3/CD3CN = 4/1, v/v, 300 MHz): delta 10.41 (brs, 8H, OH), 9.35 (brs, 4H, Py-H), 8.33 (d, J = 7.5 Hz, 2H, bipy-H), 8.26 (t, J = 7.0 Hz, 2H, bipy-H), 7.92 (brs, 4H, Py-H), 7.51 (t, 2H, bipy-H), 7.26 (d, J = 4.4 Hz, 2H, bipy- H), 6.99 (s, 4H, ArH), 6.95 (s, 4H, ArH), 6.89 (s, 4H, ArH), 6.67 (s, 4H, ArH), 4.11 (d, J = 13.8 Hz, 2H. CH2), 4.02 (d, J = 13.6 Hz, 4H. CH2), 3.80 (brs, 4H, CH2), 3.66 (brd, J = 10.8 Hz, 4H, CH2), 3.47 (brd, J = 13.8 Hz, 4H. CH2), 3.43 (brd, J = 12.9 Hz, 2H. CH2), 3.32 (d, J = 12.9 Hz, 4H, CH2), 2.19, 2.17 (s, 24H, CH3). 13C NMR ( CDCl3/CD3CN = 4/1, v/v, 75.6 MHz): delta 157.0, 153.2, 151.7, 150.7, 149.7, 147.2, 142.3, 131.2, 131.1, 130.0, 129.6, 129.5, 128.2, 128.0, 127.8, 127.8, 127.7, 124.2, 123.0, 121.0, 118.8, 57.7, 56.7, 32.0, 31.5, 20.5, 20.3. FABMS: m/z: 1611.5 ( M+); HRMS (FAB): calcd for C89H88F3N6O11S106Pd ( M2+ + TflO-), 1611.5219. Found: 1611.5231.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

Reference£º
Article; Takemura, Hiroyuki; Mogami, Yukako; Okayama, Kanae; Nagashima, Noriko; Orioka, Kana; Hayano, Yuri; Kobayashi, Asako; Iwanaga, Tetsuo; Sako, Katsuya; Journal of Inclusion Phenomena and Macrocyclic Chemistry; vol. 95; 3-4; (2019); p. 235 – 246;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Continuously updated synthesis method about (2,2¡ä-Bipyridine)dichloropalladium(II)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 14871-92-2, We look forward to the emergence of more reaction modes in the future.

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

[Pd(bpy)Cl2] (0.10 g, 0.30 mmol) was suspended in water (4 mL). Lactic acid (0.03 g, 0.28 mmol) and 1 M NaOH (0.60 mL) were dissolved in water (10 mL) and then added to the mixture, which was heated under reflux at 150 C with continuous stirring until a clear yellow solution was obtained. The solution was filtered and acetone (10 mL) was added to the solution. The reaction mixture was cooled to 4 C for a long time (2 months), resulting yellow crystals of complex 5. Yield: 33%. m.p.: 250 C. Elemental Anal. Calc. for C13H13ClN2OPd (355.10): C, 44.0; H, 3.7; N, 7.9. Found: C, 44.1; H, 3.6; N, 7.8%. IR (KBr, numax/cm-1): 1634 s, nu(CO); 1621 s, nu(CC); 1496 m, 1443 s, nu(CC,CN). Far-IR (Nujol, numax/cm-1): 333 m, nu(Pd-Cl); 285 m, nu(Pd-C); 243 m, nu(Pd-N). 1H NMR (CDCl3, delta/ppm): 2.40 (s, 3H, c), 3.01 (s, 2H, a), 7.61 (m, 2H, 5,5?), 8.02 (m, 4H, 3,3? and 4,4?), 9.31, 9.51 (2d, 2H, 6,6?).

Reference£º
Article; Balboa, Susana; Carballo, Rosa; Castineiras, Alfonso; Gonzalez-Perez, Josefa Maria; Niclos-Gutierrez, Juan; Polyhedron; vol. 50; 1; (2013); p. 512 – 523;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Sources of common compounds: (2,2¡ä-Bipyridine)dichloropalladium(II)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 14871-92-2, other downstream synthetic routes, hurry up and to see.

14871-92-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), it is a common compound, a new synthetic route is introduced below.

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Sources of common compounds: (2,2¡ä-Bipyridine)dichloropalladium(II)

[Pd(bpy)Cl2] (0.20 g, 0.60 mmol) was suspended in water (25 mL). Silver nitrate (0.20 g, 1.19 mmol) in water (5 mL) was added and the reaction mixture was stirred for 6 h at 60 C and then at room temperature, always in absence of light. The resulting solution was centrifuged and filtered to remove AgCl. A few drops of water, glycolic acid (0.05 g, 0.66 mmol) and 1 M NaOH (1.20 mL) were added to the filtrate. The resulting solution was stirred for 5 days and concentrated at 60 C to 5 mL on a rotary evaporator. The mixture was cooled to room temperature and the yellow powder was filtered off and dissolved from water and again concentrated to 5 mL. Yellow single crystals suitable for X-ray diffraction were obtained from the resulting solution by slow evaporation at room temperature. Yield: 41%, m.p.: 212 C. Elemental Anal. Calc. for C12H16N2O6Pd (390.67): C, 36.9; H, 4.1; N, 7.2. Found: C, 36.7; H, 4.0; N, 7.1%. MS (FAB+): m/z [assignment(relative intensity)]: 337(35) [M+], 262(94), 157(100). IR (KBr, numax/cm-1): 3376 m,br, 3207 m,br, nu(OH); 1626 s, nu(CC), nuasym(CO2); 1497 w, 1451 m, nu(CC,CN); 1370 m, nusim(CO2); 415 m. Far-IR (Nujol, numax/cm-1): 385 s, nu(Pd-O); 252 m, nu(Pd-N). 1H NMR (CD3OD, delta/ppm): 4.35 (s, 2H, b), 7.71 (m, 2H, 5,5?), 8.28 (m, 2H, 4,4?), 8.39 (d, 2H, 3,3?), 8.49 (d, 2H, 6,6?). 13C NMR (CD3OD, delta/ppm): 72.71 (1C, b), 124.93 (2C, 3,3?), 128.64, 129.04 (2C, 5,5?), 142.44, 142.78 (2C, 4,4?), 150.10, 151.44 (2C, 6,6?). UV-Vis (numax/cm-1): 36101, 30120, 26525 (Reflectance)., 14871-92-2

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

The chemical industry reduces the impact on the environment during synthesis, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

14871-92-2,A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccatorovernight.[(PdII(Bpy)(3-Hydroxy-4?-methoxyFla)][BF4] complex1 Yield: 129 mg, 70% (orange crystals) Found: C, 50.51;H, 3.01; N, 4.52; Calcd for C26H19BF4N2O4Pd:C, 50.64;H, 3.11; N, 4.54. UV-Vis lambdamax (CH3CN/nm)(epsilon/M-1 cm-1) (444 (25 200); 1H NMR (CD3CN, 400 MHz): delta 7.92 (d,J = 6.5 Hz, 2H), 7.85 (m, J = 21.9 Hz, 4H), 7.65 (t, J = 18.7,2H), 7.47 (d, J = 7.3 Hz, 2H), 7.28 (t, J = 11.4 Hz, 1 H),7.19 (d, J = 6.5 Hz, 2 H), 7.13 (t, J = 13.9 Hz, 1 H), 6.66 (d,J = 8.1 Hz, 2 H); 13C NMR (CD3CN, 400 MHz): delta = 181.44,161.13, 153.96, 153.65, 152.62, 151.82, 150.65, 148.54,148.20, 140.94, 140.67, 138.01, 133.05, 129.37, 129.14,127.34, 127.27, 125.04, 124.44, 124.03, 123.10, 123.01,121.96, 121.73, 117.45, 115.53, 54.91 ppm. ESI MS: m/z(pos.) 529.04., 14871-92-2

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Continuously updated synthesis method about (2,2¡ä-Bipyridine)dichloropalladium(II)

Pd(2,2?-bpy)Cl2 (67 mg, 0.2 mmol) was stirred with AgNO3 (68 mg, 0.4 mmol) in water (10 mL) with light excluded at 40 C for 12 h. The suspension obtained was cooled to 0 C in ice bath for 30 min. Then AgCl was removed from the solution by filtration. 1 (52.8 mg, 0.2 mmol) was added to the clear filtrate and pH was measured and found to be 2.0. Then the mixture was stirred at 40 C for 2 h. The resulting light yellow solution was concentrated to a volume of 5 mL at 40 C on a rotary evaporator. Yellow cubes were obtained after one day. The yield was 85 mg (60%). 1H NMR (D2O, pD 2.0, 298 K, delta, ppm): 1?, 3.69 (12 H, s, CH3), 3.60 (4H, s, CH2), 7.93 (4H, s, H6); 2,2?-bpy, 7.23 (4H, dd, H5, 3JH-H = 6.0 Hz, 4JH-H = 3.0 Hz), 7.60 (4H, t, H5?, 3JH-H = 7.2 Hz), 7.79 (4H, dd, H6, 3JH-H = 6.0 Hz), 7.94-8.18 (20H, m, H3,H3?,H4,H4?,H6?).

Reference£º
Article; Khutia, Anupam; Shen, Wei-Zheng; Das, Neeladri; Sanz Miguel, Pablo J.; Lippert, Bernhard; Inorganica Chimica Acta; vol. 417; (2014); p. 274 – 286;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

New downstream synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

Solid [Pd(bpy)Cl2] (0.166 g, 0.5 mmol) was added to dl-H2pa (0.064 g, 0.5 mmol) in ethanol (8 mL) containing triethyl amine (0.05 g, 0.5 mmol). The mixture was stirred for 72 h. The yellow-beige precipitate was filtered off, washed with ethanol and air-dried. Yield: 45%. Anal. Calcd. for C16ClH22N3O4Pd: C, 41.6; H, 4.8; N, 9.1; Cl, 7.7; Pd, 23.0%, Found: C, 41.5; H, 4.4; N, 9.0; Cl, 7.6; Pd, 23.1%. Conductivity data (10-3 M in DMF):LambdaM = 97.0 ohm-1. IR (cm-1): nu(NH) 3106; nuas(COO-) 1659; nus(COO-) 1411; nu(Pd-O) 521; nu(Pd-N) 471 cm-1. Raman: nuas(COO-) 1598; nus(COO-) 1402; delta(NH) 1560; nu(Pd-O) 529; nu(Pd-N) 450 cm-1; 1H NMR (d6-DMSO/TMS, ppm), 3.73 (d, H, Halpha); 2.50 (m, 2H, Hbeta); 2.07 (m, 2H, Hgamma); 1.30 (m, 2H, Hdelta); 3.45, 3.10 (m, 2H, Hepsilon); 13.19 (s, H, NH), ESI-MS: m/z, 816.7 {Pd(Hpa)(bpy)]2Cl}+, 780.7 {[Pd(bpy)(Hpa)]2}+, 390.0 [Pd(bpy)(Hpa)]+, 263.0 [Pd(bpy)]+.

Reference£º
Article; Alie El-Deen, Afaf A.; El-Askalany, Abd El-Monem E.; Halaoui, Ruba; Jean-Claude, Bertrand J.; Butler, Ian S.; Mostafa, Sahar I.; Journal of Molecular Structure; vol. 1036; (2013); p. 161 – 167;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Continuously updated synthesis method about (2,2¡ä-Bipyridine)dichloropalladium(II)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,2¡ä-Bipyridine)dichloropalladium(II), and friends who are interested can also refer to it.

Synthesis of [Pd{OC(O)CH2N(COPh)}(bipy)] 2 A mixture of [PdCl2(bipy)] (210 mg, 0.63 mmol) with hippuric acid (113 mg, 0.63 mmol) and silver(I) oxide (600 mg) in dichloromethane (30 mL) was refluxed for 3.5 h. Methanol (30 mL) was added, and the mixture filtered to give a clear yellow solution. The solid residue was extracted with an additional 40 mL of dichloromethane-methanol (1:1 v/v), and the filtrates combined. The solution was evaporated to dryness, redissolved in dichloromethane (40 mL) and the product precipitated by addition of petroleum spirits (40 mL). The solid was filtered, washed with petroleum spirits (10 mL) and dried under vacuum to give 2 as an orange solid (192 mg, 69%). Found: C 50.2; H 3.45; N 9.1. C18H15N3O3Pd requires C 50.5; H 3.5; N 9.8%. (0043) 1H NMR, delta 9.12-6.91 (m, bipy and Ph), 4.26 (s, CH2). ESI MS (added NaHCO2, capillary exit voltage 140 V): [M+Na]+ m/z 461.88 (100%), calculated for C19H15N3O3PdNa m/z 462.00.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,2¡ä-Bipyridine)dichloropalladium(II), and friends who are interested can also refer to it.

Reference£º
Article; Sim, Sophie A.; Saunders, Graham C.; Lane, Joseph R.; Henderson, William; Inorganica Chimica Acta; vol. 450; (2016); p. 285 – 292;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method