M.W:1000-2000 | Page 10 of 19 | Catalyst palladium

New downstream synthetic route of 52522-40-4

The chemical industry reduces the impact on the environment during synthesis, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,I believe this compound will play a more active role in future production and life.

52522-40-4,A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The catalyst was prepared according to the reported procedure in the literature [36], which briefly will explain here. A solution containing Pd2(dba)3.CHCl3 (0.149g, 0.15mmol) and Pt(Ph2Ppy)2Cl2 (0.237g, 0.30mmol) in 50mL of dichloromethane was heated in reflux condition for 2h under nitrogen atmosphere. Then the solution was cooled to room temperature, and diethyl ether was added slowly to precipitate a greenish brown solid. The precipitate was collected by filtration and dried by vacuum. Yield 0.085g, 73percent. C34H28Cl2N2P2PdPt (MW=898.95): calcd. C 45.43, H 3.14, N, 3.12. Found: C 45.21, H 3.13, N 3.48. 1H NMR in CDCl3: delta 9.61?9.50 (m, 2H), 7.75?7.32 (m, 24H), 6.78?6.67 (m, 2H). 31P NMR in CDCl3: delta?7.6 (d, 3JPaPb=14Hz, 1JPtP=4047Hz, 1P, Pa bonded to the Pt), 32.4 (d, 3JPaPb=14Hz, 1JPtP=111Hz, 1P, Pb bonded to the Pd) ppm.

Reference£º
Article; Gholinejad, Mohammad; Shahsavari, Hamid R.; Razeghi, Mehran; Niazi, Maryam; Hamed, Fatemeh; Journal of Organometallic Chemistry; vol. 796; (2015); p. 3 – 10;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Discovery of Tris(dibenzylideneacetone)dipalladium-chloroform

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of 52522-40-4

Discovery of 52522-40-4

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. Tris(dibenzylideneacetone)dipalladium-chloroform, We look forward to the emergence of more reaction modes in the future.

General procedure: 0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75%) of the title compound was obtained as pale yellow microcrystals.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Biz, Chiara; Scattolin, Thomas; Santo, Claudio; Bertolasi, Valerio; Polyhedron; vol. 102; (2015); p. 94 – 102;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Extended knowledge of 52522-40-4

52522-40-4,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.

52522-40-4, General procedure: 0.0813 g (0.4637mmol) of TMQ, 0.1671 g (1.159 mmol) of dmfu and 0.2000 g (0.1932 mmol) of [Pd2(DBA)3. CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone. The mixture was stirred for 60 m and eventually treated with active charcoal for 5/10 min and filtered on celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered, washed with diethyl ether in excess and dried under vacuum. 0.1104 g (yield 67percent) of the title compound was obtained as pale yellow microcrystals.

Reference£º
Article; Canovese; Visentin; Biz; Scattolin; Santo; Bertolasi; Journal of Organometallic Chemistry; vol. 786; (2015); p. 21 – 30;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Discovery of Tris(dibenzylideneacetone)dipalladium-chloroform

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

The origin of a common compound about Tris(dibenzylideneacetone)dipalladium-chloroform

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

Discovery of 52522-40-4

According to the analysis of related databases, Tris(dibenzylideneacetone)dipalladium-chloroform, the application of this compound in the production field has become more and more popular.

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, as follows.52522-40-4

tetrakis(triphenylphosphine)palladium(0) [generated in situ from tris(diphenylmethylideneacetone)dipalladium chloroform adduct (16 mg, 0.016 mmol) and triphenylphosphine 312 mg, 0.12 mmol)] ; tetrakis(triphenylphosphine)palladium (0) [generated in situ from tris(dibenzylideneacetone)dipalladium chloroform adduct (27 mg, 0.025 mmol) and triphenylphosphine (52 mg, 0.20 mmol)]

According to the analysis of related databases, Tris(dibenzylideneacetone)dipalladium-chloroform, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Universitetet i Olso; US2007/203159; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

The origin of a common compound about 52522-40-4

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Tris(dibenzylideneacetone)dipalladium-chloroform,52522-40-4,its application will become more common.

0.1328 g (0.4057 mmol) of 8-diphenylphosphine-2-methylquinoline, 0.0674 g (0.4261 mmol) of naphthoquinone and 0.2003 g(0.1935 mmol) of [Pd2(DBA)3CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone in a 100 ml necked flask. The mixture was stirred for 60 min at RT, the resulting orange solution treated with activated charcoal, filtered on a celite filter and concentrated under vacuum. The title complexwas precipitated as a paleorange solid by slow addition of diethylether, filtered off on a gooch, and washed with diethylether and n-pentane. 0.2039g (yield 89percent) of complex 1’b was obtained. 1H-NMR (300 MHz, CDCl3, T = 298 K, ppm) delta: 3.12 (s, 3H, quinoline-CH3), 4.98-5.05 (m, 2H, CH=CH) 7.06e7.13 (m, 2H, aryl naphthoquinone), 7.29-7.71 (m, 13H, H3, PPh2, aryl naphthoquinone), 7.79 (ddd,1H, J = 8.1, 7.5,1.4 Hz, H6), 7.90 (d,1H, J = 8.1, H7), 8.05 (dd, 1H, J = 7.5, 1.6 Hz, H5), 8.19 (dd, 1H, J = 8.4, 1.4 Hz, H4). 13C{1H}-NMR (CDCl3, T = 298 K, ppm) delta: 30.3 (CH3, quinoline-CH3), 62.7 (CH, CH=CH trans-N), 66.3 (d, CH, JCP = 21 Hz, CH=CH transP), 123.9 (CH, C3), 125.1 (CH, C5), 131.1 (CH, C7), 137.8 (CH, C6), 138.4 (CH, C4), 165.7 (d, C, JCP = 22.1 Hz, C9),165.7 (C, C2),184.0 (d, C, JCP = 6.2 Hz, CO transP), 185.2 (C, CO transN). 31P{1H}-NMR (CD2Cl2, T = 298 K, ppm) delta: 23.4. IR (KBr, pellet, cm-1): 1641 (nCO). Anal. Calcd. for C32H24NO2PPd: C 64.93, H 4.09, N 2.37. Found: C 65.06, H 3.98, N 2.21.

Reference£º
Article; Canovese, Luciano; Scattolin, Thomas; Visentin, Fabiano; Santo, Claudio; Journal of Organometallic Chemistry; vol. 834; (2017); p. 10 – 21;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Extended knowledge of Tris(dibenzylideneacetone)dipalladium-chloroform

0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75percent) of the title compound was obtained as pale yellow microcrystals.