Catalyst palladium

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 14871-92-2

First, 63.6 mg (0.2 mmol)Of compounds 111-5 and 32.2 mmol (0.6 mmol)Of methanol was added to a mixture of 30 ml of anhydrous methanol and tetrahydrofuran(Volume ratio of 1: 1)Argon protection,After stirring at room temperature for 1.5 h,Followed by the addition of 66.4 mg (0.2 mmol) of cis-dichloro-1,1′-bipyridyl palladium (II)Continue to argon protection,Stirring at 25 C for 14 h,After the reaction,The resulting solid was purified by column chromatography,Get the target product,Weight 93.8 mg, yield: 85%.

Reference£º
Patent; Changchun Institute of Applied Chemistry, Chinese Academy of Sciences; Wang, Zhiyuan; Liu, Bo; Qiao, Wenqiang; (34 pag.)CN103483391; (2016); B;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

General procedure: To a stirred suspension of [Pd(bpy)Cl2] (0.03 g, 0.1 mmol) or[Pd(phen)Cl2] (0.04 g, 0.1 mmol) in MeOH (10 mL) a solution ofHhmbt (0.023 g, 0.1 mmol) in MeOH containing KOH (0.006 g,0.1 mmol; 10 mL) was added drop by drop with stirring. The reactionmixture was warmed for 48 h, upon which a yellow-orangeprecipitate was filtered off, washed with MeOH, Et2O and driedin vacuo.For[Pd(bpy)(hmbt)]Cl2H2O: Yield: 0.07 g (51%). ElementalAnal.: Calcd. C, 49.5; H, 4.3; N, 12.6; Pd, 19.1 (C23H24N5O3Pd);Found: C, 49.7; H, 4.2; N, 12.7; Pd, 19.1%. Conductivity data(103 M in DMF): KM = 84.0 ohm1. IR (cm1): m(CN), 1621;m(CO), 1251; m(N-N), 1141; m(Pd-O), 500; m(Pd-N), 459. Raman(cm1): m(CN), 1602; m(CO), 1251; m(N-N), 1141; m(Pd-O), 501;m(Pd-N), 460. 1H NMR (ppm): 8.00 (H(3), d, J = 6 Hz, 1H); 7.75(H(6), S, 1H); 7.86 (H(7), d, J = 5.4 Hz, 1H); 7.73 (H(8), t, J = 5 Hz,1H); 7.69 (H(9), t, J = 5 Hz, 1H); 7.22 (H(10), d, J = 5.2 Hz, 1H);2.50 (CH3, S, 3H). MS (m/z): 486.4 (Calcd. 486.4), 368.2 (Calcd.368.4), 292.4 (Calcd. 292.4), 262.4 (Calcd. 262.4), 156.3 (Calcd.156.0).For[Pd(phen)(hmbt)]ClH2O: Yield: 0.08 g (54%). ElementalAnal.: Calcd. C, 53.2; H, 3.9; N, 12.4; Pd, 18.7 (C25H22N5O2Pd);Found: C, 53.3; H, 4.0; N, 12.3; Pd, 18.6%. Conductivity data(103 M in DMF): KM = 81.0 ohm1. IR (cm1): m(CN), 1600;m(CO), 1252; m(N-N), 1138; m(Pd-O), 564; m(Pd-N), 495. Raman(cm1): m(CN), 1604; m(CO), 1252; m(N-N), 1139; m(Pd-O), 565;m(Pd-N), 495. 1H NMR (ppm): 7.96 (H(3), d, J = 5.1 Hz, 1H); 7.30(H(6), S, 1H); 7.60 (H(7), d, J = 4.5 Hz, 1H); 7.77 (H(8), t,J = 4.2 Hz, 1H); 7.73 (H(9), t, J = 4.5 Hz, 1H); 7.22 (H(10), d,J = 4.2 Hz, 1H); 2.50 (CH3, S, 3H). MS (m/z): 510.4 (Calcd. 510.4),286.4 (Calcd. 286.4), 180.6 (Calcd. 180.0).

Reference£º
Article; El-Asmy, Hala A.; Butler, Ian S.; Mouhri, Zhor S.; Jean-Claude, Bertrand J.; Emmam, Mohamed S.; Mostafa, Sahar I.; Journal of Molecular Structure; vol. 1059; 1; (2014); p. 193 – 201;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

14871-92-2 A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(bpy)PdCl2 (167 mg, 0.5 mmol) and AgNO3 (170 mg, 1.0 mmol) was mixed in CH3NO2 (40 mL). The mixture was stirred at 60 C for 24 hrs, and the white AgCl precipitate was filtered by a short pad of celite. The filtrate was sampled for ESI-HRMS, and cationic C20H18N4O2Pd22+ (m/z: 279.9743) was observed. Then the filtrate was concentrated and recrystallized to give 25 mg light yellow needle-like solid. Yield 9.0%.

Reference£º
Article; Yang, Zhenyu; Ni, Yuxin; Liu, Rui; Song, Kaixuan; Lin, Shaohui; Pan, Qinmin; Tetrahedron Letters; vol. 58; 21; (2017); p. 2034 – 2037;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days., 14871-92-2

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

New downstream synthetic route of 14871-92-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(2,2¡ä-Bipyridine)dichloropalladium(II),14871-92-2,its application will become more common.

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccator overnight.

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of [1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II)

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,72287-26-4,[1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II),its application will become more common.

A common heterocyclic compound, 72287-26-4,[1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 72287-26-4

To a solution of Example 246A (48 mg, 0.11 mmol) and Example 246B (25 mg, 0.11 mmol) in EtOH (1 mL) and toluene (1 mL) under an argon atmosphere were added 2M Na2CO3 (0.165 mL, 0.33 mmol) followed by Pd(PPh3)4 (13 mg, 0.011 mmol)). The resulting suspension was stirred under argon at 85¡ã C. for 2 hours. The reaction was cooled to ambient temperature, concentrated and purified by preparative HPLC to give the title compound (8.8 mg). HPLC Rt=2.203 min. m/z=446.08.

Reference£º
Patent; Fink, Brian E.; Gavai, Ashvinikumar V.; Vite, Gregory D.; Han, Wen-Ching; Misra, Raj N.; Xiao, Hai-Yun; Norris, Derek J.; Tokarski, John S.; US2005/250753; (2005); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of 52522-40-4

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

tetrakis(triphenylphosphine)palladium(0) [generated in situ from tris(diphenylmethylideneacetone)dipalladium chloroform adduct (16 mg, 0.016 mmol) and triphenylphosphine 312 mg, 0.12 mmol)] ; tetrakis(triphenylphosphine)palladium (0) [generated in situ from tris(dibenzylideneacetone)dipalladium chloroform adduct (27 mg, 0.025 mmol) and triphenylphosphine (52 mg, 0.20 mmol)]

Reference£º
Patent; Universitetet i Olso; US2007/203159; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A new synthetic route of (2,2¡ä-Bipyridine)dichloropalladium(II)

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material., 14871-92-2

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Some scientific research about Tris(dibenzylideneacetone)dipalladium-chloroform

52522-40-4 A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Some scientific research about Bis(tri-tert-butylphosphine)palladium

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Bis(tri-tert-butylphosphine)palladium,53199-31-8,its application will become more common.

53199-31-8 A common heterocyclic compound, 53199-31-8,Bis(tri-tert-butylphosphine)palladium, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid., 53199-31-8

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method