Category: 52522-40-4

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, it is a common compound, a new synthetic route is introduced below.52522-40-4

0.1624 g (0.4076 mmol) of 1,2-bis(diphenylphosphine)ethane, 0.1671 g (1.159 mmol) of dmfu and 0.2002 g (0.1934 mmol) of [Pd2(DBA)3*CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone and vigorously stirred for 60 min. Owing to the progressive dissolution of [Pd2(DBA)3*CHCl3], the violet color of the mixture gradually disappeared and the concomitant precipitation of the scarcely soluble pale yellow complex 1j was observed. The solution was dried under vacuum, the residue dissolved in CH2Cl2, treated with activated charcoal and filtered on a celite filter. The clear pale yellow solution was concentrated under vacuum and the title complex precipitated by slow addition of diethylether. Complex 1j was filtered off on a gooch, washed with diethylether and dried under vacuum. 0.2027 g (yield 81percent) of the title complex 1j as a pale yellow solid was obtained. 1H NMR (300 MHz, CDCl3, T = 298 K, ppm) delta: 2.11-2.61 (m, 4H, CH2P), 3.40 (s, 3H, OCH3), 4.33-4.42 (m, 2H, CH=CH), 7.32-7.53 (m, 16H, PPh), 7.79-7.85 (m, 4H, PPh). 13C{1H} NMR (CDCl3, T = 298 K, ppm selected peaks) delta: 26.7 (m CH2, CH2P), 50.5 (CH3, OCH3), 52.9 (m, CH, CH=CH), 173.7 (C, CO). 31P{1H} NMR (CD2Cl2, T = 298 K, ppm) delta: 39.0. IR (KBr, pellet, cm-1): 1683 (nCO). Anal. Calcd. for C32H32O4P2Pd: C 59.22, H 4.97. Found: C 59.11, H 5.03., 52522-40-4

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 52522-40-4, other downstream synthetic routes, hurry up and to see.

Reference£º
Article; Canovese, Luciano; Scattolin, Thomas; Visentin, Fabiano; Santo, Claudio; Journal of Organometallic Chemistry; vol. 834; (2017); p. 10 – 21;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. Tris(dibenzylideneacetone)dipalladium-chloroform,52522-40-4, This compound has unique chemical properties. The synthetic route is as follows.,52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 52522-40-4.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: 0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75%) of the title compound was obtained as pale yellow microcrystals.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Biz, Chiara; Scattolin, Thomas; Santo, Claudio; Bertolasi, Valerio; Polyhedron; vol. 102; (2015); p. 94 – 102;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, it is a common compound, a new synthetic route is introduced below.

52522-40-4, A mixture of 38 mg (0.37 mmol) Pd2(dba)3CHCl3, 100 mg (0.74mmol) of [Mo3S4Cl3(dbbpy)3]Cl and 56 mg (0.74 mmol) of thioureain 20 ml of dichloromethane was refluxed for 5 hours. An excess ofhexane was layered onto the resulting brown solution to givegreenish-brown crystals of 2. Yield: 80 mg (71percent). Anal. Calcd forC55H76N8Cl4Mo3S5Pd: C 42.7, H 5.0, N 7.2, S 10.4. Found: C 42.8,H 5.1, N 7.0, S 10.4. 1H NMR (500.13 MHz, CDCl3): delta = 9.74 (d, J =6.11 Hz, 3H), 9.03 (d, J = 5.95 Hz, 3H), 8.49 (d, J = 1.22 Hz, 3H);8.39 (d, J = 1.22 Hz, 3H); 7.58 (p, J = 4.65, J = 1.75 Hz, 6H), 6.37 (s,4H), 1.46 (s, 27H) 1.41 (s, 27H) ppm. IR (KBr, cm1): 3397 (w,sh), 3156 (m), 3127 (m), 2962 (vs), 2907 (s), 2870 (s), 1615 (vs),1545 (m), 1481 (m), 1464 (m), 1410 (s), 1367 (m), 1310 (w),1294 (w), 1255 (m), 1203 (w), 1157 (w), 1127 (w), 1079 (w),1024 (m), 901 (m), 883 (w), 852 (w), 836 (m), 744 (w), 719 (w),605 (w), 551 (w), 485 (w), 427 (w). ESI-MS (+; CH2Cl2/CH3CN):m/z = 1611 [Mo3S4(Pdtu)Cl3(dbbpy)]+, 1436 [Mo3S4(Pd)Cl3(dbbpy)]+,1327 [Mo3S4Cl3(dbbpy)]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 52522-40-4, other downstream synthetic routes, hurry up and to see.

Reference£º
Article; Laricheva, Yuliya A.; Gushchin, Artem L.; Abramov, Pavel A.; Sokolov, Maxim N.; Polyhedron; vol. 154; (2018); p. 202 – 208;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.

A mixture of 55 mg (0.53 mmol) Pd2(dba)3CHCl3 and 200 mg(0.11 mmol) of [Mo3S4Cl3(dnbpy)3]PF6 in 20 ml of dichloromethanewas refluxed for 1 day. An excess of hexane was layeredonto the resulting brown solution to give brown crystals of 3.Yield: 113 mg (57percent). Anal. Calcd for C84H132N6Cl4Mo3S4Pd: C53.4, H 7.0, N 4.5, S 6.8. Found: C 53.6, H 7.1, N 4.4, S 6.9. 1HNMR (500.13 MHz, CDCl3): delta = 9.78 (d, J = 5.75 Hz, 3H), 9.35 (d, J= 5.62 Hz, 3H), 7.99 (s, 3H); 7.93 (s, 3H); 7.25 (d, J = 5.50, 6H),2.76 (t, J = 6.75 Hz, 6H), 2.71 (t, J = 7.7 Hz, 6H), 1.68 (p, J12 = 7.95,J23 = 7.82 Hz, 6H), 1.39 (p, J12 = 7.7, J23 = 7.1 Hz, 6H), 1.29 (s, 72H),0.89 (s, 18H) ppm. IR (KBr, cm1): 3376 (w, sh), 3223 (w), 3123(w), 2923 (s), 2852 (s), 1648 (w), 1614 (vs), 1554 (m), 1486 (m),1462 (m), 1415 (s), 1376 (w), 1338 (w), 1314 (w), 1260 (m),1188 (w), 1096 (s), 1021 (m), 913 (w), 873 (m), 802 (m),766 (w), 721 (w), 698 (w), 615 (w), 474 (w), 421 (w). ESI-MS(+; CH2Cl2/CH3CN): m/z = 1893 {H[Mo3S4(PdCl)Cl3(dnbpy)]}+,1855 [Mo3S4(Pd)Cl3(dnbpy)]+, 1348 [Mo3S4Cl3(dnbpy)]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Laricheva, Yuliya A.; Gushchin, Artem L.; Abramov, Pavel A.; Sokolov, Maxim N.; Polyhedron; vol. 154; (2018); p. 202 – 208;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: 0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75%) of the title compound was obtained as pale yellow microcrystals.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Biz, Chiara; Scattolin, Thomas; Santo, Claudio; Bertolasi, Valerio; Polyhedron; vol. 102; (2015); p. 94 – 102;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, as follows.52522-40-4

To 50.0 mg (0.0483 mmol, 1 equiv.) of Pd2dba3?CHCl3 in 1.5mL of anhydrous acetone was added 134.0 mg (1.449 mmol, 30 equiv.) of norbornadiene and 27.0 mg(0.242 mmol, 5 equiv.) of N-methylmaleimide under an atmosphere of argon. The reaction mixture wasstirred for 30 min at room temperature, upon which noticeable palladium black had accumulated in thereaction vessel. The reaction mixture was transferred via cannula and filtered under argon to provide atranslucent yellow-green solution. The solution was briefly concentrated in vacuo to provide a moreviscous, yellow-green oil, to which 5.0 mL of anhydrous Et2O was added. This provided an opaque,yellow-green suspension of Pd(NBD)(NMM) catalyst as a fine yellow powder, which was usedimmediately in the coupling reaction, to avoid degradation.

According to the analysis of related databases, Tris(dibenzylideneacetone)dipalladium-chloroform, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Nytko, Frederick E.; Shukla, Krupa H.; DeShong, Philip; Heterocycles; vol. 8; 2; (2014); p. 1465 – 1476;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method